Project Feature:

1. It is composed of non igniting aggregate with a certain particle grading, special cement, high-performance conductive powder, other admixtures and admixtures.

2. Distribute it evenly on the concrete surface at the initial setting stage, and form a dense whole with the concrete ground after overall solidification.

3. Super strong hardening surface layer, high performance wear-resistant ground with high compression resistance, impact resistance, wear resistance, high density and coloring, can completely avoid the problems of bulging and shrinkage cracks that often occur in leveling layers.

4. The surface layer is wear-resistant and not easy to dust; Compression resistance, impact resistance, good toughness; No sparks are generated due to object impact or friction, and the antistatic effect is excellent;

5. The fireproof grade reaches Grade A, which is a green and environmentally friendly inorganic floor product.

Construction Process：

Concrete Pouring：

The minimum cement content of the base concrete is 300kg/m3, the water cement ratio should be controlled below 0.55, and the site slump of the base concrete should be between 75 and 100mm, with a thickness of at least 5cm.

Non Igniting And Anti-static Carborundum Surface Layer：

first use a disc mechanical trowel to remove the slurry, and then evenly spread 2/3 of SPR-34113 ESD non igniting and anti-static carborundum wear-resistant material to fully absorb moisture in the concrete. Use a troweling machine to lift the slurry and smooth it, and then evenly spread the remaining 1/3 of non igniting and anti-static carborundum wear-resistant material until smooth and smooth.

Curing Layer：

Spray SPR-38111C carborundum curing agent or maintain with clean water for 28 days.

Place Of Application:

Suitable for reconstruction projects of new concrete floors and some old concrete floors that require wear resistance, impact resistance, non ignition, explosion prevention, static electricity prevention, and dust reduction, such as hazardous goods warehouses, oil manufacturing, and storage depots; Electronic precision instrument and meter workshop, gas manufacturing workshop, chemical and flammable goods workshop, logistics warehouse, high-voltage substation, flammable goods stacking area, mail warehouse, and other places.