Project features：

1. This product is composed of modified MMA resin and anti-slip raw materials. After construction, the materials can form a concave and convex surface, achieving good anti slip effect;

2. Wear resistance, long service life, water resistance, oil resistance, and various detergents;

3. Strong weather resistance and extensibility suitable for asphalt foundations;

4. Water based materials, low carbon and environmental protection.

Construction process：

Asphalt foundation ground：

It is necessary to fully compact and wear off the excess asphalt on the surface after more than half a year of normal driving to reduce the risk of cracking and peeling caused by asphalt shrinkage. Before construction, the foundation surface should be cleaned to achieve maximum adhesion between the water-based MMA primer and the base layer.

Prime coat：

Mix SPR-58106C water-based MMA primer Agent A and Agent B evenly in proportion, and apply evenly on the cleaned base layer using a roller.

Anti-slip layer：

Fully mix agent A and agent B of SPR58107P water-based MMA finish paint evenly in proportion, add graded sand, and then mix into mortar. The total mixing time is controlled within 3-5 minutes. Apply evenly to the primer with a trowel. (Note: Do not dilute with water at will.)

Topcoat:

Mix SPR58107P water-based MMA topcoat Agent A and Agent B evenly in proportion, add fine sand, and then mix to form a mortar to evenly spray on the anti-slip layer.